Unique 32cal
Home Up Information Just Ask Links Accessories

$8.00 per order flat rate USPS Priority shipping and handling

 

Unique .32ACP (7.65mm) grips and magazines are listed on this page

 

This gun will have the magazine release at the lower rear of the grip frame.

Unique L (Lc) .32ACP (7.65mm), blued steel body-floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

 

Unique L (Lc) .32ACP (7.65mm) grip set, constructed of a hard black poly composite, new production replacement as pictured, does not include screws. Limited to stock on hand.

OUT OF STOCK

 

Unique BCF66 .32ACP (7.65mm), blued steel body, floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

The height of this magazine when measured from the base to the top of the feed lips along the back is approximately 3.16".

Unique Model-15 .32ACP (7.65mm), 6 round, blued steel body-floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

Dimension "A" is 3-11/32", generally this model will also have a lion in a rectangle (not oval) on the grip.

Unique Model-16 .32ACP (7.65mm), blued steel body-floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

The height of this magazine when measured along the back from the base to the top of the feed lips is approximately 4-5/32"

Unique Model-17, Kriegsmodell, and Court 9 Coups .32ACP (7.65mm), blued steel body, floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

 

Unique Kriegsmodell and Court 9 Coups .32ACP (7.65mm)grip set, constructed of a hard black poly composite, new production replacement as pictured, does not include screws. Limited to stock on hand.

OUT OF STOCK

 

The height of this magazine when measured on the back from the base to the top of the feed lips is approximately 3-13/32".

Unique Model-19 .32ACP (7.65mm), blued steel body-floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

The height of this magazine when measured on the back from the base to the top of the feed lips is approximately 3-3/8".

Unique model-21 .32ACP (7.65mm), blued steel body, floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

 

The height of this magazine when measured along the back from the base to the top of the feed lips is approximately 4-5/32"

Photo above is of original Unique Model-17, Model-C, Kriegsmodell, and Court 9 Coups .32ACP (7.65mm), blued steel body, floor plate and follower, original factory used folded base type magazine.

Photo for reference only

 

 

Some replacement gun parts may require fitting or adjustment for proper operation

 

For more information click here

 

All Content Copyright Digital Consulting Services Inc. 1994-2014 All rights reserved