Melior
Home Up Information Just Ask Links Accessories

$8.00 per order flat rate USPS Priority shipping and handling

 

The Melior trade name was used on different gun models of the same caliber, the magazines do not interchange. Melior and Jieffeco guns were made in Liege, Belgium. Please read the descriptions before purchasing, grips are listed at the bottom of the page.

 

The height of this magazine (dimension "A") when measured along the back from the base to the top of the fed lips is approximately 2.62"

Melior vest pocket, may also be marked "Mercury" .22 LONG, blued steel body with poly follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

The height of this magazine when measured along the back from the base to the top of the fed lips is approximately 3.48"

Melior "1920", may also be marked "Mercury" imported until the 1950's .22LR, blued steel body with alloy follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

The height of this magazine (dimension "A") when measured along the back from the base to the top of the fed lips is approximately 2.55"

Melior old type may be marked Jieffeco .25acp (6.35), blued steel body and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

The height of this magazine (dimension "A") when measured along the back from the base to the top of the fed lips is approximately 2.59"

Melior "1920", may also be marked "Mercury" imported until the 1950's .25acp (6.35mm), blued steel body and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

 

The height of this magazine (dimension "A") when measured along the back from the base to the top of the fed lips is approximately 2.3"

Melior "open slide" type .25acp (6.35mm), blued steel body and follower, new production non-factory magazine. Limited to stock on hand. OUT OF STOCK

 

 

The height of this magazine (dimension "A") when measured along the back from the base to the top of the fed lips is approximately 3.4"

Melior old type may be marked Jieffeco .32acp (7.65mm), blued steel body and follower, new production non-factory magazine. Limited to stock on hand.

OUT OF STOCK, if you want to be added to a list for this item use the "Just Ask" button at the top of this page.

 

The height of this magazine when measured along the back from the base to the top of the fed lips is approximately 3.42"

Melior "1920", may also be marked "Mercury" imported until the late 1950's .32acp (7.65mm), blued steel body and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

The height of this magazine when measured along the back from the base to the top of the fed lips is approximately 3.39"

Melior "1920", may also be marked "Mercury" imported until the late 1950's .380acp (9mm KURZ), blued steel body and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

The screw holes on the grip plates are approximately 2.15" center to center

Melior early "1920" type .25acp (6.35mm) grip set, new production non-factory as pictured. Does not include screws. Limited to stock on hand.

Quantity:
 

 

The screw holes on the left grip plate are approximately 1.82" center to center

Melior "1920" .25acp (6.35mm) grip set, for guns without a grip safety, new production non-factory as pictured. Does not include screws.

Quantity:
 

 

Melior "1920" .25acp (6.35mm) grip set, for guns with a grip safety, new production non-factory as pictured. Does not include screws. Limited to stock on hand.

OUT OF STOCK, if you want to be added to a list for this item use the "Just Ask" button at the top of this page.

 

The screw holes on the left grip plate are approximately 2.63" center to center

Melior "1920" new type .22LR, .32ACP and .380ACP grip set, new production non-factory as pictured. Does not include screws. Limited to stock on hand.

OUT OF STOCK

 

Some replacement gun parts may require fitting or adjustment for proper operation

 

For more information click here

 

All Content Copyright Digital Consulting Services Inc. 1994-2014 All rights reserved