Magazine disassembly
Home Up Information Just Ask Links Accessories

$9.00 per order flat rate USPS Priority shipping and handling

 

This information is provided as is. Neither ammoclip.com, our parent company, employees, owners or the author assumes any liability for accidents, injury or damages resulting from the use or misuse of the information. It is our position that any changes made to a gun or component of it be performed by a competent gunsmith. Always wear eye protection and never use live ammo when working on a gun or component of a gun.

 

For magazines with a welded or permanently attached floor plate:

 

Tools needed are something to evenly depress the follower and a pin or heavy wire to hold the spring in place and protective eyewear.

 

Put on your protective eyewear. Evenly depress the follower at least half way and put the pin thru a lower counting hole to hold the spring in place.

 

The follower should just fall free from the magazine at this point.

 

 

 

 

Some replacement parts may require fitting or adjustment for proper operation

 

For more information click here

 

 

All Content Copyright © Digital Consulting Services Inc. 1994-2017 All rights reserved

 

 

 Website updated 12/15/2017